Preschool Curriculum

How To Explain Saab 93 Key Fob To A Five-Year-Old

How to Replace a Saab 9-3 Key

The Saab 9-3 is a car that has a large deal of appeal for drivers. It has excellent visibility and an efficient engine. It has a very high safety rating.

It is vital to have two keys that work for your vehicle. It can be costly to replace a key in the event that you lose it.

How to replace the ignition Key on a Saab 9-3

If the car key won’t start in the ignition it is time to replace it. This guide will guide you through how to do it on the Saab 9-3. You will need to replace the key, get a new reprogrammable cell, and buy a new case for your key-fob.

Contrary to earlier models, modern Saab cars use a transponder on the key-fob instead physical key that can be used to unlock and start the vehicle. The problem with this is that the reprogrammable battery inside the key-fob eventually wears out and lose charge for any longer. This is especially when you use the same key for the lock you have.

The good news is that it is easily replaced by an experienced locksmith. You can also do it yourself if have the necessary tools and a little bit of patience. The first step is to remove the key-fob off. Insert flatheads into the slot in the middle of your case. It is important to take your time, as the plastic is very thin and easily damaged.


Once the case is opened and the case is opened, you can make the new key by combining the lower half of the previous key with the banana and transponder on the new key. This will ensure that the new key is connected to the CIM correctly, which could make a huge difference when replacing the original key for your Saab 9-3.

How to Replace the Ignition Key on the Saab 900

If you don’t have two keys, you’ll have to take off the dashboard and steering wheel in order to access the ignition. Start by disconnecting the negative battery cable. After the battery has been disconnected, you can remove all the trim pieces and dashboard pieces that surround the steering wheel. Once the dash has been removed, insert screws into the hole behind the ignition switch.

The ignition cylinder is fitted with a key lock which can stop the vehicle from starting if it doesn’t have the key in it. If the ignition switch of your 900 isn’t working, check the key to see whether it’s inside the lock or is stuck in the barrel of ignition. It is also recommended to rotate your keys and keep them clean to prevent bending.

Saab cars differ from other cars in that they don’t make use of traditional keys made of metal. Instead, the car recognizes electric signals from the key fob using the use of a special microchip.

If you lose just one working key fob your dealer will charge you the cost of replacing your computer module (also called the CIM). We can reprogram the EEPROM on your current computer to enable it to accept new keys, without the need for replacement. You will save over 50% on the price of the dealer! This is the SAAB KEY PROGRAM. Find out more about it here!

How do you replace the ignition Key in the Saab9-5

The metal portion of a classic Saab key is easy to copy, and it’s not a major obstacle against theft of vehicles. The real security is the electronic component inside the key-fob. It is equipped with a chip which recognizes your car once it’s inserted into the ignition switch.

Saab has relied on the technology of this anti-theft system for over a decade. It’s not as good as a physical lock on the door but it makes stealing your own car significantly more difficult. This is why every Saab owner should always keep an extra key on hand.

The majority of new Saabs come with two keys in the factory, however you can add more at the dealer with a handheld computer called a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 models, which are more modern and more advanced features that require an ignition key.

The dealer will replace the CIM or TWICE module in those cars if keys are lost, and charge you a premium for doing it. However, we can reprogram the EEPROM in your existing computer and make it accept new keys without replacing the expensive modules.

How do I replace the ignition Key in an XC90 Saab

It may be time to replace your SAAB key fob if it’s experiencing difficulty turning the barrel of the lock. The process is relatively simple and doesn’t require you to visit a dealer. You can complete the process at home, using a couple of simple tools.

In the beginning, you’ll need to prepare the new key. Before you begin, disable the anti-theft by placing blocks underneath your rear wheels and engaging your handbrake. Then, saab key replacement derby can insert the key into the ignition and turn it to the on position which activates the accessories but doesn’t start the engine. Repeat this five times, and then leave the key in the “on” position.

You’ll then need to purchase a new case for your key fob. You can find them at any auto parts store and they’re generally quite affordable. Depending on the model, you could even purchase them without electronic components.

To open up the case, place a flathead screwdriver inside the slot located in the middle and slowly work it. After you’ve separated the case, you’ll have access to all the internal electronic components. Use a flathead screwdriver to gently pry out the electronics.

Leave a Comment

Your email address will not be published. Required fields are marked *

Complete 50%

Launch Your Digital Marketing Career in 21 Days

Fill in the details to get FREE access to career changing training videos

Privacy Policy: We hate spam and promise to keep your email address safe